Guide ·

How do I reduce my business energy costs? 10 tips from 1,600+ quotes

Most advice on cutting energy bills is about switching off lights. That helps, but the biggest savings for a business usually come from the contract itself: which charge you negotiate, when you renew, and what you compare.

"After making more than 1,600 quotes, the one thing I tell every business is this: if you're a high consumer, ask your supplier to reduce the unit rate, because for a high consumer the unit rate makes the most difference. If you're a low consumer, it's the standing charge that makes the difference."

Hassan Shoaib, Founder of Cybernex

1. Work out whether you're a high or low user

Your bill has two main parts: the unit rate (pence per kWh you use) and the standing charge (pence per day, whatever you use). Which one matters more depends on how much you use. Here are two offers for the same electricity contract:

Offer AOffer B
Unit rate28p/kWh26p/kWh
Standing charge60p/day90p/day
Café, 5,000 kWh a year£1,619.00 (cheaper)£1,628.50
Factory, 200,000 kWh a year£56,219.00£52,328.50 (£3,890.50 cheaper)

The extra 30p a day on Offer B costs £109.50 a year. Its 2p lower unit rate only pays that back above 5,475 kWh a year. Below that, the lower standing charge wins. Above it, the lower unit rate wins, and the gap grows with every kWh.

2. High user? Negotiate the unit rate

If you use a lot (factories, cold stores, hotels, multi-site businesses), a fraction of a penny per kWh is worth thousands of pounds a year. Ask your supplier or broker for a lower unit rate before you worry about the standing charge.

3. Low user? Negotiate the standing charge

Small shops, offices and cafés often pay more in standing charges than they expect, because it's charged every day of the year. A cheap-looking unit rate with a high standing charge can be the more expensive deal.

4. Renew before your contract ends

If a contract ends and you haven't agreed a new one, you can be moved onto out-of-contract or deemed rates, which are usually much higher than a fixed price. Start getting quotes a few months before your end date.

5. Compare more than one contract length

1, 2 and 3-year fixes each have their own unit rates and standing charge. Get prices for all of them and compare the annual cost of each against what you pay now. How to compare contract lengths.

6. Use your real annual usage

Quotes are only as good as the usage behind them. Send actual meter reads (or get a smart meter) so your annual usage isn't overestimated. If your usage covers more than one year, divide it down to one year first.

7. Half-hourly site? Check your agreed capacity

Large sites pay a capacity charge for the kVA agreed with the network, every day. If your real peak is well below the agreed figure, you may be paying for capacity you never use. Ask your supplier or network operator whether it can be reviewed.

8. Check VAT and the Climate Change Levy

Business energy is normally charged 20% VAT, but some supplies qualify for 5%, for example low-usage sites and some charity or residential use.[1] Most businesses also pay the Climate Change Levy, 0.801p/kWh since April 2026,[2] unless they qualify for an exemption or a Climate Change Agreement. Make sure your bill applies the right rates.

9. Move usage to cheaper times

If your meter has day and night rates, running heavy equipment, heating water or charging vehicles at night can cut costs without using less energy.

10. Ask what your broker earns

Brokers have to tell business customers what commission they earn. It's built into your unit rate, so ask, and compare the rate with and without it.

Compare your offers with your real usage, free →

Sources

  1. GOV.UK: VAT on fuel and power (Notice 701/19) ↩
  2. GOV.UK: Climate Change Levy rates ↩

Example prices are for illustration only. Prices move daily: always get a live quote before you sign.